|
|
INO SAR-600 / 800 / 1000 / 1250 / 1450
Prefeeder |
Download |
The coil unwinder Series INO SAR has been designed
as a strain free cable feeder.
The coil is driven by four synchronized drive rollers ( INO
SAR 600 two rollers) on the ouside diameter of the coil flange.
The unwinder is controlled and regulated by sag control INO
DHS 1000 or by dancer arm. The system guarantees that the product
is feed to the processing machine without any pull in the opposite direction.
This concept eliminates the undesirable stretching of the insulation
and coating of cables. The Series INO SAR has two centering
cones, which allows processing of coils with damaged flanges.
|
|
 |
INO SAR 600 |
| |
|
INO SAR 800 / 1000 / 1250 / 1450 |
| Specification |
SAR-600 |
SAR-800 |
SAR-1000 |
SAR-1250 |
SAR-1450 |
| Main Drive: |
all models with frequency controlled three-phase-motor |
| Spool Diameter: |
150 - 600 mm |
400 - 800 mm |
500 - 1000 mm |
600 - 1250 mm |
700 - 1450 mm |
| Spool Weight: |
up to 150 kg |
up to 300 kg |
up to 500 kg |
up to 500 kg |
up to 500 kg |
| Feed Speed: |
up to 3 m/sec. |
up to 2 m/sec. all models |
| |
INO SAR 800 / 1000 / 1250 / 1450 - with INO KSP-8000 up to 3m/sec. |
| Power Supply: |
230 V / 50 Hz |
3 x 400 V / 50-60 Hz - all models |
| Dimensions, LxWxH cm: |
100x100x110 |
180x176x132 |
200x192x144 |
230x198x151 |
210x190x155 |
| Part Number: |
49.52.00 |
49.50.00 |
49.51.00 |
49.53.00 |
49.54.00 |
Option
- Pneumatically lifting device - to put the coil into the prefeeder
- Motorial adjustment for driving axle
- Cable Reservoir INO KSP - 8000
|
another diameters at request
|
|
|
